CCNA lab

CCNA Certification

The Cisco CCNA network associate certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks, including implementation and verification of connections to remote sites in a WAN. This new curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. This new curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs)

* 1 Console Login
* 2 Router Configuration
* 3 Examine the Router
* 4 Copy to a TFTP server
* 5 Copy from TFTP server
* 6a Clear the backup config
* 6b Saving the backup configuration
* 7 Copy to NVRAM
* 8 Initial router configuration
* 9 Initial Switch Configuration
* 10 RIP routing
* 11 IGRP routing
* 12 Create Accesslist
* 13 IPX Access List Security
* 14 IPX router configuration
* 15 IPX SAP filtering
* 16 Limitting VTY address
* 17 Load 2600 OS
* 18 Navigating the IOS
* 19 Password recovery
* 20 Telnet to a remote Router